Helloo

Service Includes

Window AC service typically includes a comprehensive maintenance and cleaning process to ensure that your air conditioner operates efficiently and effectively. The services provided may vary depending on the specific service provider, but here are the common tasks typically included in a window AC service:

Cleaning the AC unit: This involves cleaning the air filters, evaporator coils, and condenser coils. Dust and debris accumulate over time, which can reduce the AC's cooling efficiency. Cleaning these components can help improve the AC's performance and indoor air quality.

Checking for refrigerant leaks: The technician will inspect the AC system for any refrigerant leaks. If any leaks are found, they will need to be repaired to ensure the AC works properly.

Refrigerant level check: The technician will check the refrigerant level and recharge it if necessary. Proper refrigerant levels are essential for optimal cooling performance.

Inspecting the condensate drain: The condensate drain collects moisture produced during the cooling process. The technician will ensure it is clear and free from blockages, preventing water leakage and potential damage.

Inspecting electrical components: The electrical connections, controls, and capacitors will be checked to ensure they are in good working condition. Faulty electrical components can cause operational issues or even pose safety risks.

Cleaning the blower fan: The blower fan inside the AC unit can accumulate dirt and dust, affecting its performance. Cleaning the fan helps in maintaining efficient airflow.

Checking the thermostat: The technician will verify that the thermostat is calibrated correctly and functioning accurately to maintain the desired temperature.

Inspecting the overall unit: The technician will perform a general inspection of the AC unit to identify any potential issues or parts that may require replacement.

Testing the AC: Once all the maintenance tasks are completed, the technician will test the AC to ensure it is running correctly and efficiently.

Service not included

Services that are typically not included in a standard AC service package may vary depending on the service and the specific service . However, here are some common services that are usually not part of a standard AC service:

Repairing major AC components: If your air conditioner has a significant mechanical or electrical issue, such as a faulty compressor or a damaged motor, it may require additional repair work beyond standard maintenance. Repairs often involve replacing parts, which may incur extra costs.

Replacing damaged or worn-out parts: While some minor parts like air filters may be included in a standard service, major components that are damaged or worn out might require replacement. The cost of new parts is typically not included in a routine service.

Duct cleaning: Duct cleaning is a separate service that involves cleaning the air ducts and vents in your home. It is not typically included in a standard AC service. Duct cleaning can help improve indoor air quality and HVAC system efficiency, but it is a specialized task that may require a separate service appointment.

Thermostat replacement: If your thermostat is malfunctioning or outdated, you might need a replacement. While technicians may inspect the thermostat during a standard service, the cost of a new thermostat is usually not covered in the basic service package.

Air balancing: Air balancing is the process of adjusting the airflow in different rooms to ensure even cooling throughout the house. This task requires specialized measurements and adjustments and is typically not included in a standard AC service.

Additional refrigerant charges: A standard AC service may include checking and topping up refrigerant levels if needed. However, if the AC system requires a significant refrigerant recharge due to leaks or other issues, it may involve an additional cost.

Emergency services: If your AC breaks down outside of regular business hours and requires immediate attention, emergency services may not be covered in the standard service package and could involve extra charges.

Service Includes

Removal and Transportation: The service technician will first uninstall the outdoor unit (condenser) of the air conditioning system from its current location. This involves disconnecting electrical connections, refrigerant lines, and any other necessary components.

Cleaning and Inspection: The outdoor unit will be thoroughly cleaned to remove dirt, dust, debris, and any other obstructions that may have accumulated. The technician will also inspect the unit for any visible damage or wear.

Replacement of Components (if needed): If any components in the outdoor unit are found to be faulty or damaged, the technician may recommend replacing them. This can include parts like fan blades, capacitors, contactors, etc.

Preparation of Installation Area: Before re-installing the unit, the technician will ensure that the area where the condenser will be placed is suitable. This includes checking for proper ventilation, sufficient spacing, and a level surface to prevent vibrations.

Refrigerant Handling: If the refrigerant lines were disconnected during the removal process, the technician will carefully handle the refrigerant to ensure it is properly evacuated, stored, and recharged according to safety and environmental regulations.

Re-Installation: The outdoor unit will be placed back in its designated location and securely fastened. The technician will then reconnect all electrical connections and refrigerant lines.

Testing and Commissioning: Once the installation is complete, the technician will test the AC system to ensure that it is functioning correctly. This includes checking the cooling performance, airflow, thermostat calibration, and verifying that there are no refrigerant leaks.

Final Checks: The technician will conduct a final inspection to make sure everything is in order and that the AC unit is operating efficiently.

Service not included

Indoor Unit Cleaning: The service mentioned is primarily focused on the outdoor unit (condenser) of the air conditioning system. Indoor unit cleaning, which involves cleaning the evaporator coils, blower fan, and other internal components, is usually a separate service.

Air Duct Cleaning: Cleaning the air ducts that distribute conditioned air throughout your home is usually not part of the outdoor AC unit service. Duct cleaning is a separate service.

Additional Refrigerant Charges: The service mentioned may include handling the existing refrigerant during the re-installation process, but if the system requires additional refrigerant due to leaks or other issues, it may come with an extra charge.

Major Repairs or Component Replacement: If significant repairs are needed, or if major components of the outdoor unit (such as the compressor) need replacement, these may incur additional costs beyond the basic re-installation service.

Thermostat Replacement: If you need to replace the thermostat or install a new one, this is generally considered a separate service.

Electrical Work Beyond Re-Installation: The service may cover reconnecting existing electrical connections, but if additional electrical work is required or if there are electrical issues with your home's wiring, this may not be included.

Moving the Outdoor Unit to a Different Location: The service typically covers re-installing the outdoor unit in its existing location. If you want to move the unit to a new spot, this may involve extra charges.

Repairing/Replacing Indoor Unit Components: If there are issues with the indoor unit (e.g., blower motor problems), these may not be included and would require a separate service.

Any Structural Modifications: If the re-installation requires structural modifications to your home or the installation of a new mounting platform, these would generally not be included in a standard re-installation service.

Service Includes

Power Disconnection: The service technician will disconnect the power supply to the AC unit to ensure safety during the uninstallation process.

Recovery of Refrigerant: If the AC unit contains refrigerant, the technician will handle the proper recovery of the refrigerant according to safety and environmental regulations. Refrigerant should not be released into the atmosphere as it can be harmful to the environment.

Removal of Indoor Unit (if applicable): For split-type air conditioners, the indoor unit, which includes the evaporator and blower, will be uninstalled from its mounted location. This may involve disconnecting refrigerant lines and drainage pipes.

Removal of Outdoor Unit: The outdoor unit (condenser) will be disconnected from its current location and removed from the premises. This includes disconnecting refrigerant lines, electrical connections, and any other necessary components.

Packing and Transportation: The technician will properly pack and transport the AC unit to ensure it remains protected during transit.

Patch Up (if needed): After removing the indoor and outdoor units, any holes or openings created during the installation (such as for refrigerant lines and drainage pipes) may be patched up or sealed, leaving the area in good condition.

Final Checks: The technician will conduct a final inspection to make sure the area is clean, and all necessary components have been properly removed.

Optional Disposal: Some AC uninstallation services may offer to dispose of the old AC unit responsibly, adhering to local regulations for electronic waste disposal. However, this service may be subject to additional charges.

Service not included

AC Unit Disposal: AC uninstallation services may offer to dispose of the old unit, it is not always included. If you want to dispose of the AC unit responsibly, there may be additional charges for this service.

Patch Up and Repair: While the work our technician may patch up any holes or openings created during the uninstallation process, any additional repairs or modifications to the walls or structure caused by the original AC installation are usually not included.

Indoor Unit Cleaning: AC uninstallation services are generally focused on removing and disconnecting the AC unit. Cleaning the indoor unit's evaporator coils, blower fan, or other internal components is typically a separate service.

Air Duct Cleaning: Cleaning the air ducts is not part of the AC uninstallation service. If you want the air ducts cleaned, you would need to request a separate duct cleaning service.

Transportation of the AC Unit to a New Location: If you plan to move the AC unit to a different location or property, the transportation to the new location is not usually included in the uninstallation service.

Electrical Work beyond Disconnection: While the service will include disconnecting the power supply to the AC unit, any additional electrical work, such as rewiring or installing new electrical connections, would generally be considered a separate service.

Refrigerant Replacement or Recharging: If the AC unit requires new refrigerant or a recharge after uninstallation, this would typically not be part of the uninstallation service.

Any Additional Repairs or Component Replacement: If there are issues with the AC unit that require repairs or component replacement, these would be considered separate services and may incur additional charges.

Testing and Commissioning of the AC Unit: AC uninstallation services do not involve testing or commissioning the unit. This service is typically provided during AC installation.

Warranty on Uninstallation: AC uninstallation services might not come with a warranty, as it is a one-time service to remove the unit.

Always make sure to clarify the specific services included in the AC uninstallation package with the technician to avoid any misunderstandings and to plan for any additional services you may need.

Service Includes

An AC service that includes a 1mm copper pipe set typically refers to the installation or replacement of the copper pipes used for refrigerant circulation between the indoor and outdoor units of a split-type air conditioning system. Here's what the service may include:

Removal of Old Copper Pipes (if applicable): If there are existing copper pipes that need to be replaced, the service will involve the removal of the old pipes.

Measurement and Cutting: The technician will measure the distance between the indoor and outdoor units to determine the required length of the new copper pipes. They will then cut the copper pipes to the appropriate size.

Flaring and Swaging: Flaring and swaging are processes that create a smooth, cone-shaped end on the copper pipes to ensure leak-free connections.

Connecting Indoor and Outdoor Units: The technician will connect the newly prepared copper pipes to the indoor and outdoor units, ensuring a secure and tight fit.

Insulation: After connecting the copper pipes, the technician will insulate them with foam or rubber insulation to prevent energy loss and condensation.

Vacuuming: The refrigerant lines need to be vacuumed to remove any air and moisture that might be present in the system. This ensures proper refrigerant circulation and system efficiency.

Refrigerant Charging: Once the vacuuming process is complete, then will charge the system with the appropriate amount of refrigerant.

Leak Testing: The AC system will be thoroughly checked for any refrigerant leaks to ensure there are no issues with the newly installed copper pipes.

Testing and Commissioning: After completing the installation, the technician will test the AC system to ensure that it is functioning correctly. This includes checking the cooling performance, airflow, thermostat calibration, and verifying that there are no refrigerant leaks.

Final Checks: The technician will conduct a final inspection to make sure everything is in order and that the AC unit is operating efficiently.

Service not Includes

AC Unit Installation or Uninstallation: The service specifically focuses on the installation or replacement of the copper pipe set. If you need a complete AC unit installation or uninstallation, it would be a separate service.

AC Unit Repair or Maintenance: This service is solely concerned with the copper pipe set installation or replacement. If your AC unit requires repairs or maintenance, such as cleaning the coils or replacing faulty components, these services would be separate and may incur additional charges.

Air Duct Cleaning: The AC service involving the copper pipe set does not include cleaning the air ducts that distribute conditioned air throughout your home. Air duct cleaning is a separate service that targets dust, debris, and contaminants within the ductwork.

Electrical Work beyond Copper Pipe Connection: The service will handle the electrical connections necessary for the copper pipe set and the AC unit to function correctly. However, any additional electrical work or modifications beyond this scope, such as rewiring or installing new electrical connections, would typically be considered a separate service.

Replacement of AC Components: If any components of the AC unit, other than the copper pipe set, need replacement or repair (e.g., compressor, fan motor, condenser, evaporator), these services would be separate and might involve extra charges.

Thermostat Replacement: If you need to replace the thermostat or install a new one, this service is not included in the copper pipe set installation.

Moving the AC Unit to a Different Location: If you want to relocate the entire AC unit to a new spot, this would be a separate service and not part of the copper pipe set installation.

Additional Refrigerant Charges: While the copper pipe set service includes refrigerant charging and leak testing, any additional refrigerant charges required due to leaks or other issues would not be part of this specific service.

Structural Modifications: If the installation of the copper pipe set requires structural modifications to your home, such as creating new openings or pathways for the pipes, these modifications would be separate services.

AC System Design and Sizing: The service assumes that you have already determined the appropriate AC system design and sizing. If you need assistance with system design and sizing, it would be a separate consulting service.

Service Includes

An AC floor stand service typically refers to the installation or maintenance of an air conditioning unit that is placed on the floor with the help of a dedicated floor stand. Here's what the service may include:

Pre-Installation Inspection: The service begins with an inspection of the installation area to determine the best location for the AC floor stand. The technician will assess factors like proper ventilation, accessibility, and space requirements.

Assembly of AC Floor Stand: If the floor stand is not pre-assembled, the technician will assemble it to ensure it provides stable support for the AC unit.

Placement of AC Unit on the Floor Stand: The AC unit will be placed on the floor stand securely, ensuring it is level and balanced.

Mounting and Fixing: The technician will properly mount and fix the AC unit to the floor stand to prevent any movement or instability.

Electrical Connections: The service will include connecting the AC unit to the electrical supply to ensure it can be powered on and off as needed.

Refrigerant Handling: If the AC unit requires refrigerant, the technician will handle the refrigerant properly, following safety and environmental regulations. They will charge the unit with the appropriate amount of refrigerant to ensure optimal performance.

Drainage Setup: If the AC unit produces condensation during operation, the technician will create a drainage system to ensure that condensation is properly channeled outside.

Testing and Commissioning: Once the installation is complete, the technician will test the AC unit to ensure that it is functioning correctly. This includes checking the cooling performance, airflow, thermostat calibration, and verifying that there are no refrigerant leaks.

Maintenance and Cleaning (if applicable): If the service includes maintenance, the technician may clean the filters, coils, and other components of the AC unit to ensure optimal performance and efficiency.

Demonstration and Instructions: The technician will provide instructions on how to operate the AC unit, including how to use the remote control (if applicable) and change settings.

Final Checks: The technician will conduct a final inspection to make sure everything is in order, and the AC unit is operating efficiently.

Service not Includes

AC Unit Purchase: The floor stand service usually assumes that you already have the AC unit. If you don't have an AC unit and need to purchase one, that would be a separate service or transaction.

AC Unit Repair: If your AC unit requires repair due to any issues or malfunctions, the floor stand service does not cover those repairs. AC repair is a separate service that addresses specific problems with the AC unit.

AC Unit Maintenance: While some floor stand services may include basic maintenance tasks like cleaning filters or coils, a comprehensive maintenance service that includes thorough cleaning, inspection, and servicing of the AC unit is typically not part of the floor stand service.

Air Duct Cleaning: Cleaning the air ducts that distribute conditioned air throughout your home is generally not included in the AC floor stand service. Air duct cleaning is a separate service that targets dust, debris, and contaminants within the ductwork.

Electrical Work Beyond AC Connection: The service includes connecting the AC unit to the electrical supply, but any additional electrical work, such as rewiring or installing new electrical connections, would generally be considered a separate service.

Refrigerant Handling: While the service may handle the initial refrigerant charging during AC installation, any future refrigerant handling, such as refilling or recharging, due to leaks or other issues, would not be part of the floor stand service.

Moving the AC Unit to a Different Location: If you decide to relocate the entire AC unit and floor stand to a different spot, this would be a separate service and not part of the original floor stand service.

AC System Design and Sizing: The floor stand service assumes that you have already determined the appropriate AC system design and sizing. If you need assistance with system design and sizing, it would be a separate consulting service.

Warranty on AC Unit: The floor stand service typically does not include any warranty on the AC unit itself. Any warranty coverage would be provided by the AC unit manufacturer or dealer separately.

Service Includes

The 1 mm drain pipe for AC service refers to the condensate drain pipe that carries the water condensed from the air inside the air conditioner to the outside. This pipe is responsible for draining the excess water produced during the cooling process, preventing water buildup inside the indoor unit and potential water leaks.

Visual Inspection: During the AC service, technician will visually inspect the 1 mm drain pipe for any signs of blockage, damage, or leakage. They will check if the pipe is properly connected and positioned to allow proper drainage.

Cleaning the Drain Pipe: If there's any debris or dirt clogging the 1 mm drain pipe, technician will clean it thoroughly to ensure smooth water flow. They might use a small brush, compressed air, or specialized cleaning tools to clear the blockage.

Checking the Drain Tray: The drain tray or drip tray, located below the evaporator coil, is where the condensate collects before draining through the 1 mm drain pipe. Technician will inspect the drain tray for any dirt or microbial growth and clean it if necessary.

Flushing the Drain Line: In some cases, a buildup of algae, mold, or bacteria can clog the 1 mm drain pipe. Technician may use a mild solution or a specialized drain line cleaning agent to flush out any organic matter and prevent future blockages.

Ensuring Proper Slope: The 1 mm drain pipe should have a slight downward slope to ensure gravity helps in draining the water efficiently. AC technician will check and adjust the slope if necessary to avoid water accumulation.

Testing for Leaks: After cleaning and reassembling the drain pipe, the technician will conduct a leak test to verify that there are no leaks in the system. This is crucial to prevent water damage to the surrounding area.

Water Flow Test: To ensure the 1 mm drain pipe is functioning correctly, technician will perform a water flow test. AC tecnician will pour a small amount of water into the drain tray and observe how it drains through the pipe.

Recommendations: If the technician notices any issues with the 1 mm drain pipe that require repair or replacement, they will provide recommendations for further actions to maintain the proper functioning of the AC system.

Service not Includes

Refrigerant Check and Recharge: Checking the refrigerant level and recharging it if necessary is a separate service that may not be included in the basic drain pipe cleaning service. Ensuring the correct refrigerant levels is essential for the proper cooling performance of the AC unit.

Electrical System Inspection: A basic drain pipe service often focuses on the drainage system and cleaning. A comprehensive electrical system inspection, including checking the capacitors, relays, and other electrical components, is typically a separate service.

Compressor Inspection: The compressor is a critical component of an AC system. A thorough inspection of the compressor's health and performance may not be included in a basic drain pipe service.

Coil Cleaning: While the drain pipe service involves cleaning the evaporator coil to some extent, a more thorough coil cleaning service, such as chemically cleaning the coils, may be separate.

Thermostat Calibration: Calibration or adjustment of the thermostat for accurate temperature readings and optimal cooling may not be included in a basic service.

Blower Motor Cleaning and Lubrication: Cleaning and lubricating the blower motor for efficient airflow may be an additional service.

Duct Cleaning: Cleaning the air ducts to remove dust, allergens, and debris may be a separate service not included in the basic drain pipe service.

System Performance Evaluation: A comprehensive assessment of the AC system's overall performance and efficiency may not be part of a standard drain pipe service.

Repair of Damaged Components: If any components of the AC system are damaged and require repair or replacement, it may not be included in a basic drain pipe service.

Air Filter Replacement: While cleaning the filters is often part of a basic service, replacing them with new filters may not be included.

Service Includes

The AC universal back plate service involves installing or replacing the back plate of an air conditioner's indoor unit. The back plate is a crucial component that provides structural support and stability to the indoor unit. It also serves as a mounting point for the indoor unit, ensuring it is securely attached to the wall or the mounting surface.

Removal of Old Back Plate (if applicable): If there is an existing back plate that needs replacement, carefully will remove it from the wall.

Back Plate Inspection: Inspect the new universal back plate for any visible defects, damage, or missing parts. We ensure that the back plate is suitable for the specific model and size of the indoor unit.

Mounting the New Back Plate: Position the new universal back plate on the wall or the mounting surface where the indoor unit will be installed.

Securing the Back Plate: Securely will attach the new back plate to the wall or mounting surface using appropriate screws and fasteners. And will ensure the back plate is firmly fixed to provide stable support for the indoor unit.

Reconnecting the Indoor Unit: Carefully reattach the indoor unit to the new back plate. Align the mounting brackets on the indoor unit with the corresponding slots or hooks on the back plate. Securely fasten the indoor unit to the back plate using screws or brackets.

Level Check: We use a level tool to ensure the indoor unit is level and properly aligned with the floor.

Final Inspection: We Conduct a thorough inspection of the entire assembly to ensure everything is securely attached and properly aligned.

Power On and Test: Turn on the power supply to the air conditioner. Testing the indoor unit to ensure it's functioning correctly and securely attached to the new back plate.

Remember, if you are not experienced in handling AC installations or back plate replacements, it's best to hire a professional technician to perform this service safely and effectively. Incorrect installation of the back plate can lead to stability issues and potential damage to the indoor unit or the surrounding area.

Service Includes

An AC wet service, also known as AC deep cleaning or AC wet wash service, involves a comprehensive cleaning of the air conditioning system, including both the indoor and outdoor units. It is a more thorough maintenance service compared to the standard dry service.

Initial Inspection: The HVAC technician will inspect the entire AC system, both indoor and outdoor units, for any visible damage, loose connections, or signs of wear and tear.

Filter Cleaning: The air filters will be removed from the indoor unit and cleaned thoroughly. The filters may be rinsed with water or vacuumed to remove dust and debris.

Coil Cleaning: The evaporator coil (indoor unit) will be cleaned using a specialized coil cleaner or a mixture of water and mild detergent. This step helps in improving cooling efficiency.

Condenser Cleaning: The condenser coil (outdoor unit) will also be cleaned to remove dirt, debris, and any obstructions that might hinder proper heat dissipation.

Drain Line Cleaning: The condensate drain line will be checked for clogs or blockages and cleaned to ensure proper drainage.

Blower and Fan Cleaning: The blower motor and fan blades will be thoroughly cleaned to ensure smooth airflow and efficient cooling.

Fin Straightening: If there are any bent fins on the condenser or evaporator coil, the technician will use a fin comb to straighten them. This process improves airflow and system performance.

System Test: After completing the cleaning and maintenance tasks, the AC system will be tested to ensure it's functioning correctly.

Final Check: The technician will conduct a final inspection of the entire AC system to ensure all components are properly cleaned and secured.

Customer Explanation: The technician will explain the work done during the AC wet service to the customer and address any questions or concerns they may have.

Service Includes

Split AC installation service involves the proper setup and installation of a split air conditioning system. This type of AC system consists of two main units: an indoor unit that is installed inside the room and an outdoor unit that is placed outside the building.

Site Inspection: The Helloo bhaiaah technician will visit the location where the split AC is to be installed. Ac technician will assess the best location for mounting the indoor unit, taking into consideration factors such as room size, wall strength, and proximity to the outdoor unit.

Indoor Unit Installation: Helloo Bhaiaah AC technician will mount the indoor unit on the selected wall using brackets. They will drill holes in the wall to pass the necessary pipes and cables to connect the indoor and outdoor units.

Outdoor Unit Placement: The outdoor unit will be placed on a sturdy platform or mounting bracket at a suitable location outside the building. The AC technician will ensure the unit is level and stable.

Refrigerant Piping: Copper pipes and refrigerant lines will be connected between the indoor and outdoor units to facilitate refrigerant flow. The pipes will be insulated to prevent condensation and maintain efficiency.

Electrical Connections: The electrical connections between the indoor and outdoor units will be made, including the power supply and control wiring. AC technician will ensure all connections are secure and properly insulated.

Condensate Drain: The condensate drain pipe will be installed to carry away the water condensed inside the indoor unit. Proper slope and drainage will be ensured to prevent water leaks.

Testing and Vacuuming: AC technician will perform a pressure test to check for any refrigerant leaks. AC technicians will also vacuum the refrigerant lines to remove any air and moisture, ensuring proper refrigerant circulation.

Gas Charging: The appropriate amount of refrigerant will be charged into the system to achieve the specified cooling capacity. The gas charge will be adjusted as necessary to achieve optimal performance.

System Test: After completing the installation, AC technician will perform a full system test to ensure the AC is cooling correctly and all components are functioning properly.

Customer Demonstration: The technician will explain the operation and basic maintenance of the split AC to the customer. They will address any questions or concerns the customer may have.

Proper installation is crucial for the optimal performance and efficiency of the split AC system. It's essential to hire a qualified and experienced HVAC technician to carry out the installation service to ensure safety and reliable cooling performance.

Service not included

Electrical Wiring and Circuit Installation: While connecting the indoor and outdoor units' electrical components is part of the standard installation, running new electrical circuits or wiring may require a separate electrical service.

Wall Reinforcement: If the selected wall for indoor unit installation requires additional reinforcement or modifications, it may not be included in the standard installation.

Remote Control Setup: Setting up advanced features of the AC's remote control, such as programming timers or configuring smart connectivity, may not be part of the basic installation service.

Additional Copper Piping: If the distance between the indoor and outdoor units is considerable, additional copper piping beyond the standard kit provided may involve extra charges.

Condensate Pump Installation: In cases where the indoor unit's location is not conducive to gravity-based condensate drainage, installing a condensate pump may require a separate service.

Ductwork or Ventilation Installation: If additional ductwork or ventilation is required for improved air distribution, it may not be included in the standard split AC installation service.

AC Unit Relocation: Relocating an existing split AC unit from one room to another may not be part of the standard installation service and may require a separate service.

Outdoor Unit Mounting Bracket Installation: If the outdoor unit requires a custom mounting bracket due to specific installation conditions, it may not be included in the standard service.

AC System Design and Load Calculation: The standard installation service assumes that the customer has already chosen the appropriate AC system capacity for their space. Performing a load calculation or helping the customer decide on the right system capacity may not be included.

Dismantling and Disposal of Old AC Unit: Removing and disposing of an existing AC unit is usually not part of the standard installation service.

Service Includes

Split AC uninstallation service involves the proper removal and disconnection of a split air conditioning system. This service is typically required when relocating the AC unit to a different location or when replacing the AC system. Here's the content typically included in a split AC uninstallation service:

Indoor Unit Removal: The indoor unit will be carefully removed from the wall brackets or mounting location. The refrigerant pipes, electrical wires, and condensate drain line connected to the indoor unit will be disconnected.

Indoor Unit Installation: Helloo Bhaiaah AC technician will mount the indoor unit on the selected wall using brackets. They will drill holes in the wall to pass the necessary pipes and cables to connect the indoor and outdoor units.

Outdoor Unit Disconnection: The outdoor unit will be disconnected from the indoor unit using appropriate tools. The refrigerant lines and electrical connections between the indoor and outdoor units will be separated.

Refrigerant Recovery: If the AC system still contains refrigerant, the AC technician will recover the refrigerant using a refrigerant recovery machine. This step ensures that the refrigerant is properly removed and can be disposed of or recycled safely.

Coil and Fins Protection: AC technician may cover the indoor and outdoor coils and fins to prevent dust or debris from entering and causing damage during transportation.

Indoor and Outdoor Unit Dismantling: If required, the indoor and outdoor units may be dismantled into smaller components for ease of transportation.

Outdoor Unit Un mounting: The outdoor unit will be un mounted from the platform or bracket if applicable.

Service not included

Repair and Maintenance: Uninstallation service is focused on removing the AC system from its current location. Repairing any faulty components or providing maintenance services are not part of the standard uninstallation.

AC System Disposal: While the technician may remove the AC system from its current location, the disposal of the old AC unit is usually not included. Proper disposal may require compliance with local regulations, so it may be handled separately.

Refrigerant Handling (for some models): If the AC system still contains refrigerant, recovering or handling the refrigerant is typically not included in the standard uninstallation. Refrigerant handling may require specialized equipment and certification.

Wall Patching and Repair: After uninstalling the indoor unit, any holes or damages on the wall left by the mounting brackets or pipes are usually not repaired as part of the basic service.

Transportation to a New Location: If the purpose of uninstallation is to relocate the AC system to a different location, transportation to the new site is not typically included. The transportation of the AC system may be arranged separately.

Removal of Additional Components: AC Uninstallation service typically involves removing the indoor and outdoor units. Other additional components, such as ductwork or custom installations, may require separate service.

Reinstallation (at a New Location): If the AC system is being reinstalled at a new location, the actual reinstallation is not part of the standard uninstallation service.

Site Preparation at a New Location: If the AC system is being reinstalled at a new location, the service may not include any site preparation work required for the new installation.

Electrical Work (for Reinstallation): While disconnection of the electrical connections is part of the uninstallation, any new electrical work required for the reinstallation may not be included in the basic service.

Service Includes

A split AC service involves comprehensive maintenance and cleaning of the air conditioning system to ensure its efficient and optimal performance. Regular servicing helps extend the life of the AC unit, improves indoor air quality, and prevents potential breakdowns. Here's the content typically included in a split AC service:

Visual Inspection: The AC technician will conduct a thorough visual inspection of both the indoor and outdoor units of the split AC system. AC technician will look for any visible damage, loose connections, or signs of wear and tear.

Filter Cleaning: The air filters will be removed from the indoor unit and cleaned thoroughly. The filters may be rinsed with water or vacuumed to remove dust and debris.

Coil Cleaning: The evaporator coil (indoor unit) will be cleaned using a specialized coil cleaner or a mixture of water and mild detergent. This step helps in improving cooling efficiency and indoor air quality.

Condenser Cleaning: The condenser coil (outdoor unit) will also be cleaned to remove dirt, debris, and any obstructions that might hinder proper heat dissipation.

Drain Line Cleaning: The condensate drain line will be checked for clogs or blockages and cleaned to ensure proper drainage.

Blower and Fan Cleaning: The blower motor and fan blades will be cleaned to ensure smooth airflow and efficient cooling.

Fin Straightening: If there are any bent fins on the condenser or evaporator coil, the technician will use a fin comb to straighten them. This process improves airflow and system performance.

Refrigerant Check: The technician will check the refrigerant levels and adjust them if needed. Proper refrigerant charge is crucial for the AC's optimal cooling performance.

Electrical Connections Check: All electrical connections and wiring will be inspected for any loose connections or signs of damage. The technician will ensure that all connections are secure and properly insulated.

System Test: After completing the cleaning and maintenance tasks, the AC system will be tested to ensure it's functioning correctly. The technician will check for any unusual noises or vibrations during operation.

Final Check: AC technician will conduct a final inspection of the entire AC system to ensure all components are properly cleaned and secured.

Customer Explanation: The technician will explain the work done during the split AC service to the customer and address any questions or concerns they may have.

Regular AC servicing helps maintain the efficiency and longevity of the air conditioning system, reduces energy consumption, and provides cleaner and healthier indoor air. It is recommended to schedule AC maintenance at least once a year to keep the unit running optimally. If you're not familiar with AC maintenance procedures, it's best to hire a professional HVAC technician to perform this service effectively and safely.

Service not included

Major Repairs: While a standard AC service includes routine maintenance, major repairs or replacement of faulty components are not part of the package. Extensive repairs may require additional time and specialized skills and may be offered separately.

Gas Refill (Recharging): If the AC system's refrigerant levels are critically low, a gas refill or recharging service to replenish the refrigerant may not be included in the standard AC service.

Duct Cleaning: AC service typically focuses on cleaning the indoor unit components, but cleaning the air ducts to remove dust, allergens, and debris may be a separate service.

Condenser Coil Acid Washing: While the standard AC service may involve basic cleaning of the condenser coil, a more thorough acid washing to remove stubborn dirt and debris might be a separate service.

Thermostat Calibration: Calibrating or adjusting the thermostat for accurate temperature readings may not be included in the basic service.

Electrical System Inspection: AC service includes checking electrical connections, but a comprehensive inspection of the electrical system, including testing capacitors and relays, may be a separate service.

Gas Leak Detection and Repair: While the AC service may include checking for visible leaks, specialized gas leak detection and repair may require a separate service.

System Performance Testing: Detailed performance testing and efficiency checks may not be included in a basic AC service.

Air Handler Unit Cleaning: AC service typically focuses on the indoor and outdoor units, but in-depth cleaning of the air handler unit or blower assembly may be a separate service.

HVAC System Design and Installation: Designing or installing a new HVAC system is a separate service that requires careful calculations and expertise.

Remember, the specific services included in an AC service package may vary depending on the service, condition of the component etc. and the package chosen. If you have specific maintenance needs or concerns beyond the standard AC service, it's best to discuss them with the HVAC technician or service provider to find the most appropriate solution. Hiring a professional and experienced HVAC technician ensures that your AC system receives the care and attention it needs to perform optimally and efficiently.

Service Includes

Window AC uninstallation service involves safely and efficiently removing a window air conditioning unit from its installed location.

Preparation: Ac technician will inspect the window AC unit and the installation to assess the requirements for uninstallation.

Switch Off: AC technician will turn off the air conditioner and disconnect it from the power supply to ensure safety during the uninstallation process.

Removal from Window: The window AC unit will be carefully removed from the window frame. If the unit is secured with brackets or support, these will also be detached.

Sealing: If necessary, AC technician may assist in sealing the window or covering the opening to prevent drafts, insects, or weather from entering the space after the AC unit is removed.

Lifting and Handling: AC technicians will handle the AC unit with care during removal to avoid damage or injury.

Service not included

Window or Wall Modification: If the window or wall space requires significant modification, such as resizing or reinforcing, it may not be part of the standard installation service.

Electrical Work: While connecting the window AC to an existing electrical outlet is part of the standard installation, any new electrical work or wiring may require a separate electrical service.

Window Sealing (for non-window units): If the AC unit is installed through a hole in the wall, additional sealing or weatherproofing around the unit may not be included in the basic service.

Wall Sleeve Installation: Some window AC installations may require a wall sleeve for a more secure and weatherproof fit. If a wall sleeve is needed, it may be offered as a separate service.

Custom Mounting Brackets or Support: If the standard mounting brackets or supports are not suitable for the installation, custom brackets or support may require an additional service.

Additional Insulation or Weather Stripping: While some basic insulation is provided during the installation, additional insulation or weather stripping for better efficiency may not be part of the standard service.

AC System Design or Sizing Consultation: Choosing the appropriate window AC unit size or performing a system design analysis is typically not included in the basic installation service.

Ductwork or Ventilation Work: If additional ductwork or ventilation is required for improved air distribution, it may not be included in the standard window AC installation service.

Remote Control Setup: Setting up advanced features of the AC's remote control, such as programming timers or configuring smart connectivity, may not be included in the basic installation.

Moving or Disposal of Old AC Unit: Removing and disposing of an existing AC unit is usually not part of the standard installation service.

Service Includes

Window AC installation service involves properly setting up and installing a window air conditioning unit. This type of AC unit is designed to be mounted in a window or a specially prepared hole in a wall.

Site Inspection: AC technician will visit the location where the window AC is to be installed. They will assess the window or wall space to determine the best position for mounting the unit.

The technician will ensure that the location allows for proper airflow and is suitable for supporting the weight of the AC unit.

Preparing the Window or Wall: If the AC is being installed in a window, the technician will open the window and secure the AC unit in place using mounting brackets or supporting arms.

If the AC is being installed through a wall, the technician will create a hole of the appropriate size and secure the unit in the opening.

Electrical Connection: AC technician will connect the AC unit to an electrical outlet with the appropriate voltage and current rating. Ac tehnician will ensure that the electrical connections are secure and properly insulated.

Weather proofing: To prevent water leaks and ensure a proper seal, the technician will weatherproof the gaps around the AC unit in the window or wall.

System Test: After completing the installation, the AC system will be tested to ensure it's functioning correctly. AC technician will check for any unusual noises or vibrations during operation.

Final Check: AC technician will conduct a final inspection of the entire AC installation to ensure all components are properly installed and secured.

Customer Demonstration: AC technician will explain the operation and basic maintenance of the window AC unit to the customer.AC technician will address any questions or concerns the customer may have.